RGB 6W/m
Flexible, cuttable 6W/m RGB LED strip with three color channels, made in EU, designed for decorative and accent lighting.
- Flexible, cuttable 6W/m LED strip, designed for lighting installations
- Product tested under various conditions by accredited laboratories
- High quality LEDs are used, chosen for their great color mixing properties
- LED strip made in EU
- IP20 and IP67 ratings available
Electrical data
Item family codeNominal voltageType of currentRated powerRFX515RGB12 VDC6 W/m
Dimensions
12V LED strip can be cut every 100 mm
Wires are soldered at both ends of reel
Photometric data
Item codeColorWavelengthLight intensity*RFX515RGBRed~620-625 nm13500 mcd/mGreen~520-525 nm12375 mcd/mBlue~460-465 nm10530 mcd/m
* Measured when color is shining at full brightness.
Temperature conditions
Standard packaging
Product packaging is designed and manufactured based on: EN 13427:2006, EN 13427:2006. Packaging materials can be recycled according to EN 13430:2007.
Cardboard box. Size 187*183*20mm
Cardboard reel. Size D=190mm h=15mm
LED strip length per reel—5m
Note: installation instructions are included in every box
1. Cut the required amount of LED strip (see cut recommendations in Table 1).
2. Solder wires using flux. In order to avoid a short circuit – soldering place
must be insulated using heat shrink.
3. Mounting surface has to be clean, without any grime, grease and dust.
Take off security tape and without pressing on the diodes, glue the strip.
Do not bend the strip more than 1 time and bend it not less than 20 mm radius.
NOTE: Additional cooling is required for LED strips more powerful than 10 W/m.
4. Select a suitable power supply according to the voltage and the total power of the entire LED strip length.
Selecting a power supply, allow ~30% power headroom.
Connect LED strip to a power supply in accordance with polarity and presented connections schemes.
